Суперпластификаторы
ДЛЯ РАЗЛИЧНЫХ ЗАДАЧ И ТЕХНОЛОГИЙ
Самоуплотнение, сокращение водопотребления, повышенная прочность, устранение растрескивания, контроль образования пор
Равномерное распределение наполнителя по всей поверхности изделий, повышение прочности, самоуплотнение
Для стеклофибробетона hand press / прессование
Повышенная удобоукладываемость смеси, сокращение количества воды, повышение прочности изделий, низкий расход
ARCON-Fluid+Plus
Special high performance plasticizer for architectural and decorative concrete
-
optimized rheology
Superplasticizer baseARCON-Fluid+Plus- polycarboxylate. This group of additives, originally intended for the production of the so-called self-compacting concrete (SCC), has found its embodiment in the product ARCON-Fluid SCC.ARCON-Fluid+Plushas been designed specifically for decorative and architectural concrete, exposed concrete, artificial stone, terrazzo and other exposed filler elements, acid etching, sand or bead blasting, polished concrete, or otherwise treated concrete surfaces, in order to achieve the most uniform and uniform mixing and reduce segregation of concrete surfaces.
Uneven distribution of filler in the mixture or on the outer surface of the concrete can be effectively avoided and a consistently high quality concrete surface can be achieved. Thus, the use of superplasticizerARCON-Fluid+Plusin the production of exposed/micro-exposed aggregate concrete (see info sheetCSE Deactivators), micro-etched concrete surfaces (see info sheetMicrogel) or sandblasting of concrete surfaces, such as façade elements or similar architectural concrete, is highly recommended.
With plasticizerARCON-Fluid+Plusthere is no need to change the composition of the mixture.
On the contrary: enhanced ARCON-Fluid+Plus functionality, specifically designed for various application parameters. Being a must-have for the production of self-compacting concreteARCON-Fluid+Plusgoes one step higher. By adapting the appropriate dosage levels of the pl-astifierARCON Fluid+Plusallows the production of non-porous, fully self-compacting architectural concrete from conventional concrete mix.
Consumption:
Depending on the composition of the concrete mix and other parameters. Recommended dosage: start with 0.2 - 1.1% per 1 kg of cement and adjust according to the appearance of the mixture.
Package:
0.5 - 1.0 - 30 - 210 - 1000 kg.
Product specifications:
-
significantly improves the dispersion of cement particles, especially when compared to “conventional” plasticizers.
-
homogeneous cement paste is formed even at low friction force, which improves concrete performance.
-
allows to produce self-levelling concrete with low vibration force.
-
concrete has a more uniform structure and is not prone to delamination and excessive fluidity.
-
with a professionally prepared mixture, a non-porous surface and uniform coloration of the concrete can be achieved.
Product Benefits:
-
Water reduction and optimum plasticity characteristics reduces segregation and can be used for conventional concrete mix formulations.
-
provides a stable consistency and rheological characteristics of concrete, especially with changing production parameters.
-
Eliminates the time and cost of developing new, proprietary self-compacting concrete (SCC) formulations
-
leads to uniform and homogeneous distribution of the filler in the mixture
-
help to effectively avoid unevenness on the concrete surface and ensure a consistent quality of the concrete surface.
-
an increase of +10.5% in tensile strength and +2.5% in compressive strength was recorded in a number of tests when testing ARCON-Fluid+Plus after 24 hours compared to its predecessor ARCON-Fluid SCC_cc781905 -5cde-3194-bb3b-136bad5cf58d_
Please note that it is always necessary to carry out pilot tests that really correspond to the planned production process and application procedure.
PWC (Plasticizer for wet cast)
Жидкий суперпластификатор на основе поликарбоксилатов последнего поколения с добавлением регуляторов структурообразования, специализированный под задачи производства высококачественного сборного бетона.
PWC существенно улучшает качество бетонной смеси и бетона по ряду базовых показателей: удобоукладываемости смесей, обеспечению проектной прочности на сжатие и характеристик долговечности бетона по водонепроницаемости и морозостойкости.
Применение пластификатора PWC позволяет существенно снизить количество воды в смеси от 35 до 40%, что существенно повышает прочностные характеристики бетона, делает его более плотным и крепким.
Преимущества продукта:
-
Сокращение количества воды и оптимальные характеристики пластичности для заливки бетонной смеси в формы.
-
Способствует повышению плотности бетона и категории качества поверхности
-
Добавка обеспечивает получение самоуплотняющихся бетонов классов В60 и выше (SCC)
-
Добавка пластифицирующая, водоредуцирующая, и ускоряющая твердение бетона
Расход:
В зависимости от состава бетонной смеси и прочих параметров. Рекомендуемая дозировка: начните с 0.4 - 1.4% на 1 кг цемента и отрегулируйте согласно внешнему виду смеси.
Упаковка:
1,0 - 20 - 100-200- 1000 л.