top of page

TECHNOLOGY ACID ETCHING OF CONCRETE 
(English ACID ETCHING)

Acid etching involves treating concrete surfaces with a special acid gel.MICROGEL®  followed by rinsing with surface treatment with water. The acid gel reacts chemically with the surface laitance, dissolving it and allowing it and other water-soluble contaminants to be washed away with plain water. Thus, if your mixture contains a decorative filler of a small fraction (0-2 mm), you can expose it on the concrete surface, visually creating the effect of natural stone.

However, etching (or washing) concrete with an acid gel has additional functions: it opens the pores of the concrete and prepares the surface for further processing. Although concrete can also be prepared by hand by sanding it with a grinder, acid etching is generally much less labor intensive. Creation of logos, drawings and inscriptions on concrete surfaces can also be realized using acid gelMICROGEL® and etching techniques.

9A9A697B-1ADA-4A37-8139-29403B67FC4A.JPG
IMG_6756.jpg
IMG_2188.jpg
IMG_5695.jpg

Appearance of concrete products after removal of the upper cement layer using acid gelMicrogel forte

CREATING STRETCH CONCRETE SURFACES

The acid etching technique, with a certain composition of the mixture, makes it possible to expose fine stone filler (sand) on the concrete surface, thus, with minimal effort, concrete products can be given an exquisite texture of natural stone. Thanks to its gel-like consistency, light and precise application,MICROGEL®creates evenly etched concrete surfaces, and is suitable for processing vertical surfaces such as building facades, outdoor furniture, steps and columns.

CREATION OF LOGOS, DRAWINGS AND SIGNS

In the process of acid etching in places where the acid gel is appliedMICROGEL® a thin layer of cement is removed from the concrete surface. Thus, using vinyl stickers, we can create a variety of drawings and patterns on concrete, brand our products.

To do this, a sticker made of a waterproof material is applied to the hardened concrete surface, with a pre-made plotter cutting of the pattern, and then the places not covered by the sticker are processedMICROGEL®. Upon completion of the reaction, the surface is washed off with water, the sticker is removed and we can admire the resulting pattern.

Betonly Blends - it’s a ready to use dry mix based on white cement which contain variety o
Tuesday’s Blend in brand new mould - Iris. Available online at www.betonly.store #loftdesi
Микрогель.jpg
IMG_7521.JPG

INCREASING ADHESION AND PREPARING CONCRETE FOR COATING

Raw concrete surfaces may be too dense or smooth for a good adhesion of paint or protective impregnation. In this case, the use of acid etching technology is a simple and affordable solution to improve the level of adhesion of the treated concrete surface.

 

In order to seal the concrete surface, protect it from oil and food contamination, fungus, mold and give it a silky sheen, we recommend treating it with a special protective coating.COLORFRESH Intensive, which works 3-5 years on horizontal surfaces and more than 10 years on vertical ones. 

ANTI-SLIP EFFECT  

An additional advantage of concrete using the "Acid Etching" technique is that, due to the rough texture, it is extremely difficult slip. Thus, in some cases (for example, when constructing ramps, railway slabs, steps), the use of this technology is simply necessary and creates the safest coating for concrete elements. 

IMG_7520.JPG
IMG_7518.JPG
IMG_7482.jpg
IMG_5914.jpg

HOW IT WORKS?

Снимок экрана 2021-12-16 в 13.10.48.png

Apply

Apply acid gelMICROGEL® on a concrete surface pre-moistened with water  

Wait

Maintain reaction timeMICROGEL® with concrete surface (until bubbling ends)

wash away

Clean the surface with a directed water jet, using warm water if possible.

Ready

The acid-etched concrete surface is ready.

AREAS OF USE

If you want to passeducationat school architectural concrete BETONTECH.CLUB  at 

Petersburg and to master the technology of producing concrete with exposed filler or other techniques for creating beautiful concrete: terrazzo, glass fiber concrete, graphic concrete, geopolymer concrete and others, fill out the feedback formbelow.

 

In the processlearningYou will get a complete picture of the technological process, the characteristics of compatible equipment and tools, find out what requirements apply to raw materials and materials, get acquainted with the work of graduates of our_cc781905-5c5-8bd5_school and gain invaluable experience and knowledge that will allow you to immediately begin the successful implementation of this production line.

Message sent, thanks!

bottom of page